GRASS logo

NAME

i.ortho.photo - Menu driver for the photo imagery programs.

KEYWORDS

imagery, orthorectify, geometry

SYNOPSIS

i.ortho.photo
i.ortho.photo --help
i.ortho.photo group=name productname=string [--help] [--verbose] [--quiet] [--ui]

Flags:

--help
Print usage summary
--verbose
Verbose module output
--quiet
Quiet module output
--ui
Force launching GUI dialog

Parameters:

group=name [required]
Name of imagery group for ortho-rectification
productname=string [required]
Name of Modules
Options: i.group, i.ortho.target, i.ortho.elev, i.ortho.camera, g.gui.photo2image, i.ortho.init, g.gui.image2target, i.ortho.rectify
i.group: 1 - Select/Modify imagery group
i.ortho.target: 2 - Select/Modify imagery group target
i.ortho.elev: 3 - Select/Modify target elevation model
i.ortho.camera: 4 - Select/Modify imagery group camera
g.gui.photo2image: 5 - Compute image-to-photo transformation
i.ortho.init: 6 - Initialize exposure station parameters
g.gui.image2target: 7 - Compute ortho-rectification parameters
i.ortho.rectify: 8 - Ortho-rectify imagery files

Table of contents

DESCRIPTION

i.ortho.photo is a menu to launch the different parts of the ortho rectification process of aerial imagery. i.ortho.photo allows the user to ortho-rectify imagery group files consisting of several scanned aerial photographs (raster maps) of a common area. i.ortho.photo guides the user through 8 steps required to ortho-rectify the raster maps in a single imagery group. Alternatively, all the steps can be performed separately by running the appropriate modules.

The ortho-rectification procedure in GRASS GIS places the image pixels on the surface of the earth by matching the coordinate system of the aerial image in pixels (image coordinate system) and the coordinate system of the camera sensor in millimetres (photo coordinate system) for the interior orientation of the image, and further to the georeferenced coordinate system defined by projection parametres (target coordinate system) for exterior orientation.

EXAMPLE

Five groups of input parameters are required for ortho-rectification:
i.ortho.photo example
Example of an input oblique image in a source location

To ortho-rectify aerial images the user has to follow the menu options step by step. Alternatively, all the steps can be performed separately by running the corresponding modules.

The aerial photos shall be stored in a source location - a general Cartesian coordinate system (XY). Digital elevation model and a map reference (topo sheet or other map used for ground control point matching) shall be stored in a target location in a real-world coordinate system (e.g. ETRS33).

The steps to follow are described below:

  1. Create/Modify imagery group to be orthorectified: i.group

    This step is to be run in the source location.

    In this first step an imagery group of aerial images for ortho-rectification is created or modified. The current imagery group is displayed at the top of the menu. You may select a new or existing imagery group for the ortho-rectification. After choosing this option you will be prompted for the name of a new or existing imagery group. As a result, a new file mapset/group/name_of_group/REF is created that contatins the names of all images in a group.

    IMG_0020 source_mapset
    IMG_0021 source_mapset
    IMG_0022 source_mapset
    
  2. Select/Modify target location and mapset for orthorectification: i.ortho.target

    This step is to be run in the source location.

    The target location and mapset may be selected or modified in Step 2. You will be prompted for the names of the projected target location and mapset where the ortho-rectified raster maps will reside. The target location is also the location from which the elevation model (raster map) will be selected (see Step 3). In Step 2, a new file mapset/group/name_of_group/TARGET is created contatining the names of target location and mapset.

    ETRS_33N
    target_mapset
    
  3. Select/Modify target elevation model used for orthorectification: i.ortho.elev

    This step is to be run in the source location.

    Step 3 allows you to select the raster map from the target location to be used as the elevation model. The elevation model is required for both the computation of photo-to-target parameters (Step 6) and for the ortho-rectification of the imagery group files (Step 8). The raster map selected for the elevation model should cover the entire area of the image group to be ortho-rectified. DTED and DEM files are suitable for use as elevation model in the ortho-rectification program. In Step 3 you will be prompted for the name of the raster map in the target location that you want to use as the elevation model. As a result of this step, a new file mapset/group/name_of_group/ELEVATION is created contatining the name and mapset of the chosen DEM.

    elevation layer :ELEVATION
    mapset elevation:target_mapset
    location        :ETRS_33N
    math expression :(null)
    units           :(null)
    no data values  :(null)
    
  4. Create/Modify camera file of imagery group: i.ortho.camera

    This step is to be run in the source location.

    In Step 4 you may select or create a camera reference file that will be used with the current imagery group. A camera reference file contains information on the internal characteristics of the aerial camera, as well as the geometry of the fiducial or reseau marks. The most important characteristic of the camera is its focal length. Fiducial or reseau marks locations are required to compute the scanned image to photo coordinate transformation parameter (Step 5). Two new files are created in this step: a file mapset/group/name_of_group/CAMERA, contatining the name of the reference camera and a file mapset/camera/name_of_reference, contatining the camera parameters.

    CAMERA NAME   sony
    CAMERA ID     123
    CAMERA XP     0
    CAMERA YP     0
    CAMERA CFL    16
    NUM FID       4
          0 -11.6 0
          1 0 7.7
          2 11.6 0
          3 0 -7.7
    
  5. Compute image-to-photo transformation: g.gui.photo2image

    This step is to be run in the source location.

    The scanned image to photo coordinate transformation parameters, i.e. the "interior orientation", is computed in Step 5. In this interactive step you associate the scanned reference points (fiducials, reseau marks, etc.) with their known photo coordinates from the camera reference file. A new file mapset/group/name_of_group/REF_POINTS is created, contatining a list of pairs of coordinates in image and photo coordinate systems.

    # Ground Control Points File
    #
    # target location: XY
    # target mapset: source_mapset
    # source  target  status
    # east north east north (1=ok, 0=ignore)
    #-------------------------------------------------------------
    0 1816     -11.6 0.0     1
    2728 3632     0.0 7.7     1
    5456 1816     11.6 0.0     1
    2728 0.0     0.0 -7.7     1
    
    i.ortho.photo example
    Step 5: Image-to-photo transformation of an oblique image
  6. Initialize parameters of camera: i.ortho.init

    This step is to be run in the source location.

    In Step 6, initial camera exposure station parameters and initial variances may be selected or modified.

    • X: East aircraft position;
    • Y: North aircraft position;
    • Z: Flight height above surface;
    • Omega (pitch): Raising or lowering of the aircraft's front (turning around the wings' axis);
    • Phi (roll): Raising or lowering of the wings (turning around the aircraft's axis);
    • Kappa (yaw): Rotation needed to align the aerial photo to true north: needs to be denoted as +90° for clockwise turn and -90° for a counter-clockwise turn.
    i.ortho.photo example
    Principle of pitch and yaw

    In Step 6, a new file mapset/group/name_of_group/INIT_EXP is created, contatining camera parameters.

    INITIAL XC    215258.345387
    INITIAL YC    6911444.022270
    INITIAL ZC    1101.991120
    INITIAL OMEGA 0.000000
    INITIAL PHI   -0.168721
    INITIAL KAPPA 3.403392
    VARIANCE XC    5.000000
    VARIANCE YC    5.000000
    VARIANCE ZC    5.000000
    VARIANCE OMEGA 0.000000
    VARIANCE PHI   0.020153
    VARIANCE KAPPA 0.017453
    STATUS (1=OK, 0=NOT OK) 0
    
  7. Compute ortho-rectification parameters from ground control points: g.gui.image2target

    This step is to be run in the target location.

    The photo to target transformation parameters, i.e. the "exterior orientation", is computed in Step 7. In this interactive step, control points are marked on one or more imagery group files and associated with the known standard (e.g. UTM) and elevation coordinates. Reasonable rectification results can be obtained with around twelve control points well distributed over the image. In this step, a new file mapset/group/name_of_group/CONTROL_POINTS is created, contatining a list of pairs of coordinates of ground control points in photo and target coordinate systems.

    # Ground Control Points File
    #
    # target location: ETRS_33N
    # target mapset: target_mapset
    #	source                          target                     status
    #	east	north	height          east	north	height    (1=ok, 0=ignore)
    #------------------------------     ----------------------    ---------------
    98.3679932698 906.327649515 0.0 	1.0 5.0  100.0             1
    733.293023813 1329.61100321 0.0 	2.0 6.0  100.0             1
    1292.6317412  1703.76325335 0.0 	3.0 7.0  100.0             1
    1625.54617472 1368.11694482 0.0 	4.0 6.0  100.3             1
    3239.82849913 1390.97403968 0.0 	7.4 6.0  100.3             1
    1570.09788497 2790.06537829 0.0 	3.0 11.0 100.0             1
    
    i.ortho.photo example
    Step 7: Detail of ground control points matching in an oblique image and terrain model
  8. Ortho-rectify imagery group: i.ortho.rectify

    This step is to be run in the source location.

    Step 8 is used to perform the actual image ortho-rectification after all of the transformation parameters have been computed. Ortho-rectified raster files will be created in the target location for each selected imagery group file. You may select either the current window in the target location or the minimal bounding window for the ortho-rectified image.

    i.ortho.photo example
    Step 8: Ortho-rectified oblique image
    As a result, the ortho-rectified raster map is available for visualization and further image analysis.

REFERENCES

Wolf P.R. (1983). Elements of Photogrammetry: With Air Photo Interpretation and Remote Sensing McGraw Hill Higher Education ISBN-10: 0070713456, ISBN-13: 978-0070713451

SEE ALSO

g.gui.image2target, g.gui.photo2image, i.group, i.ortho.camera, i.ortho.elev, i.ortho.init, i.ortho.rectify, i.ortho.target

AUTHORS

Mike Baba, DBA Systems, Inc.
GRASS development team, 199?-2017

SOURCE CODE

Available at: i.ortho.photo source code (history)

Latest change: Monday Feb 27 13:45:25 2023 in commit: a82501dc85294207e8e58437c3ec7f1056465ed4


Main index | Imagery index | Topics index | Keywords index | Graphical index | Full index

© 2003-2024 GRASS Development Team, GRASS GIS 8.3.3dev Reference Manual