GRASS GIS manual: r.import

Note: A new GRASS GIS stable version has been released: GRASS GIS 7.4, available here.
Updated manual page: here

NAME

r.import - Imports raster data into a GRASS raster map using GDAL library and reprojects on the fly.

KEYWORDS

raster, import, projection

SYNOPSIS

r.import

r.import --help

r.import [-enlo] input=name [band=integer[,integer,...]] [memory=integer] output=name [resample=string] [extent=string] [resolution=string] [resolution_value=float] [--overwrite] [--help] [--verbose] [--quiet] [--ui]

Flags:

-e: Estimate resolution only
-n: Do not perform region cropping optimization
-l: Force Lat/Lon maps to fit into geographic coordinates (90N,S; 180E,W)
-o: Override projection check (use current location's projection); Assume that the dataset has same projection as the current location
--overwrite: Allow output files to overwrite existing files
--help: Print usage summary
--verbose: Verbose module output
--quiet: Quiet module output
--ui: Force launching GUI dialog

Parameters:

input=name [required]: Name of GDAL dataset to be imported
band=integer[,integer,...]: Input band(s) to select (default is all bands)
memory=integer: Maximum memory to be used (in MB); Cache size for raster rows; Options: 0-2047; Default: 300
output=name [required]: Name for output raster map
resample=string: Resampling method to use for reprojection; Options: nearest, bilinear, bicubic, lanczos, bilinear_f, bicubic_f, lanczos_f; Default: nearest; nearest: nearest neighbor; bilinear: bilinear interpolation; bicubic: bicubic interpolation; lanczos: lanczos filter; bilinear_f: bilinear interpolation with fallback; bicubic_f: bicubic interpolation with fallback; lanczos_f: lanczos filter with fallback
extent=string: Output raster map extent; Options: input, region; Default: input; input: extent of input map; region: extent of current region
resolution=string: Resolution of output raster map (default: estimated); Options: estimated, value, region; Default: estimated; estimated: estimated resolution; value: user-specified resolution; region: current region resolution
resolution_value=float: Resolution of output raster map (use with option resolution=value)

DESCRIPTION
NOTES
- Resolution
- Resampling methods
EXAMPLES
- Import of SRTM V3 global data at 1 arc-seconds resolution
- Import of WorldClim data
KNOWN ISSUES
SEE ALSO
AUTHORS

DESCRIPTION

r.import imports a map or selected bands from a GDAL raster datasource into the current location and mapset. If the projection of the input does not match the projection of the location, the input is reprojected into the current location. If the projection of the input does match the projection of the location, the input is imported directly with r.in.gdal.

NOTES

r.import checks the projection metadata of the dataset to be imported against the current location's projection. If not identical a related error message is shown.
To override this projection check (i.e. to use current location's projection) by assuming that the dataset has the same projection as the current location the -o flag can be used. This is also useful when geodata to be imported do not contain any projection metadata at all. The user must be sure that the projection is identical in order to avoid to introduce data errors.

Resolution

r.import reports the estimated target resolution for each input band. The estimated resolution will usually be some floating point number, e.g. 271.301. In case option resolution is set to estimated (default), this floating point number will be used as target resolution. Since the target resolution should be typically the rounded estimated resolution, e.g. 250 or 300 instead of 271.301, flag -e can be used first to obtain the estimate without importing the raster bands. Then the desired resolution is set with option resolution_value and option resolution=value. For latlong locations, the resolution might be set to arc seconds, e.g. 1, 3, 7.5, 15, and 30 arc seconds are commonly used resolutions.

Resampling methods

When reprojecting a map to a new spatial reference system, the projected data is resampled with one of four different methods: nearest neighbor, bilinear, bicubic iterpolation or lanczos.

In the following common use cases:

nearest is the simplest method and the only possible method for categorical data.

bilinear does linear interpolation and provides smoother output than nearest. bilinear is recommended when reprojecting a DEM for hydrological analysis or for surfaces where overshoots must be avoided, e.g. precipitation should not become negative.

bicubic produces smoother output than bilinear, at the cost of overshoots.

lanczos produces the smoothest output of all methods and preserves contrast best. lanczos is recommended for imagery. Both bicubic and lanczos preserve linear features. With nearest or bilinear, linear features can become zigzag features after reprojection.

For explanation of the -l flag, please refer to the r.in.gdal manual.

When importing whole-world maps the user should disable map-trimming with the -n flag. For further explanations of -n flag, please refer the to r.proj manual.

EXAMPLES

Import of SRTM V3 global data at 1 arc-seconds resolution

The SRTM V3 1 arc-second global data (~30 meters resolution) are available from EarthExplorer (http://earthexplorer.usgs.gov/). The SRTM collections are located under the "Digital Elevation" category.

Example for North Carolina sample dataset (the tile name is "n35_w079_1arc_v3.tif"):

# set computational region to e.g. 10m elevation model:
g.region raster=elevation -p
 
# Import with reprojection on the fly. Recommended parameters:
# resample   Resampling method to use for reprojection - bilinear
# extent     Output raster map extent - region: extent of current region
# resolution Resolution of output raster map
#  - region: current region resolution - limit to g.region setting from above
r.import input=n35_w079_1arc_v3.tif output=srtmv3_resamp10m resample=bilinear \
  extent=region resolution=region title="SRTM V3 resampled to 10m resolution"

# beautify colors:
r.colors srtmv3_resamp10m color=elevation

Import of WorldClim data

Import of a subset from WorldClim Bioclim data set, to be reprojected to current location projection (North Carolina sample dataset). Different resolutions are available, in this example we use the 2.5 arc-minutes resolution data. During import, we spatially subset the world data to the North Carolina region using the extent parameter:

# download selected Bioclim data (2.5 arc-minutes resolution)
# optionally tiles are available for the 30 arc-sec resolution
wget http://biogeo.ucdavis.edu/data/climate/worldclim/1_4/grid/cur/bio_2-5m_bil.zip

# extract BIO1 from package (BIO1 = Annual Mean Temperature):
unzip bio_2-5m_bil.zip bio1.bil bio1.hdr

# prior to import, fix broken WorldClim extent using GDAL tool
gdal_translate -a_ullr -180 90 180 -60 bio1.bil bio1_fixed.tif

# set computational region to North Carolina, 4000 m target pixel resolution
g.region -d res=4000 -ap

# subset to current region and reproject on the fly to current location projection,
# using -n since whole-world map is imported:
r.import input=bio1_fixed.tif output=bioclim01 resample=bilinear \
         extent=region resolution=region -n

# temperature data are in °C * 10
r.info bioclim01
r.univar -e bioclim01

KNOWN ISSUES

The option extent=region only works when the dataset has a different projection than the current location (i.e., internally r.proj is invoked).

AUTHORS

Markus Metz
Improvements: Martin Landa, Anna Petrasova

Last changed: $Date: 2017-03-12 07:35:42 -0700 (Sun, 12 Mar 2017) $

SOURCE CODE

Available at: r.import source code (history)