Note: This document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade, and read the current manual page.

NAME

KEYWORDS

SYNOPSIS

DESCRIPTION

Analysis methods

• Whole map layer: use entire area selected above,
• Regions: select one to many subareas via mouse,
• Sample units: automated selection of sampling area (for details see below)
  • Random nonoverlapping,
  • Systematic contiguous,
  • Systematic noncontiguous,
  • Stratified random,
  • Centered over sites (vector points).
• Moving window: rectangular or circular with size

Definition of region for analysis:

• Whole map layer: entire map (current region),
• Keyboard setting: based on keyboard selection for region definition,
• Draw the sampling frame: based on interactive region selection via mouse.

Usage details

TODO: description below needs further updates

1. View/Edit (Load a file) from the shown list: the configuration is shown in a small text editor window. Configuration files are saved in the folder C:\Users\userxy\AppData\Roaming\GRASS7\r.li\ (MS-Windows) or $HOME/.r.li/ (GNU/Linux) (the file name can be defined by the user). The output or an analysis can either be a new raster map (in case of using a "moving window" analysis) or be an ASCII text file (when not performing a "moving window" analysis) containing the result. Such text file will be saved in the folder C:\Users\userxy\AppData\Roaming\GRASS7\r.li\output\ (MS-Windows) or $HOME/.grass7/r.li/output/ (GNU/Linux).
   All dimensions are percentages of raster rows or columns.
2. Create a new configuration file: used for creating a new configuration file in an interactive way, in three steps:
   1. Choose file name and maps to use for setting:
      • Name for new configuration file(required): the name of new configuration file
      • Raster map name to use to select areas (required): the name of raster map used for selecting sampling areas
      • Vector map to overlay (optional): name of a vector map used for selecting sampling areas
   2. Set the sampling frame. The sample frame is a rectangular area which contains all the areas to analyze. It can be defined in three ways:
      • Whole map layer: the sample frame is the whole map
      • Keyboard setting: the user enters the coordinates in cells of upper left corner of sampling frame and its length in rows and columns.
      • Draw the sample frame: the user draws the sample frame on map using mouse.
   3. Set the sample areas. The sample areas are simply the areas to analyze. They can be defined in five ways (see the picture below):
      • Whole map layer: the sample area is the whole sample frame
      • Regions: the user enters the number of areas and then draws them using mouse.
      • Sample units: they are areas of rectangular or circular shape. The user can define them using keyboard or mouse.
        • keyboard: the user define the shape of sample unists and their disposition:
          • Random non overlapping: the user specifies the number of sample units and they are placed in a random way at runtime. It is guaranteed that the areas do not intersect themselves.
          • Systematic contiguous: the defined sample is placed covering the sample frame, side by side across rows.
          • Systematic non contiguous: the same as above, but here ever rectangle is spaced from another by a specified number of cells.
          • Stratified random: the sample frame is divided in n strats of rows and m strats of columns (n and m are given by user), then the specified number of sample areas are placed in a random way, one for every m*n areas defined by strats.
          • Centered over sites: the sample areas are placed into sample frame centering them on points in site file.
        • mouse: the user chooses the shape and then draws the specified number of sample areas on map.
      • Moving Window: the user defines a rectangular or circular area, it is moved over all the raster increasing only of a cell for every move(in columns if possible, if not in rows). It produces a new raster containing the result of all analysis.
      • Select areas from the overlaid vector map: the sample areas are defined by the vector map selected above. For every cat in vector map, the procedure prompts the user if they want to include it as sample area. The resulting configuration file can be used only with the specified raster map, and the procedure can be used only if whole map layer is selected as sampling frame.
3. Remove a file the selected file is deleted from the available configuration files.
4. Help: open this help text.
5. Close module window.

NOTES

Screenshots of the wizard window frames:

g.gui.rlisetup: First frame of wizard for selecting existing configuration files or creating a new one	g.gui.rlisetup: Frame for selecting maps
g.gui.rlisetup: Frame for inserting sampling areas	g.gui.rlisetup: Frame for defining rectangular moving window
g.gui.rlisetup: Frame for defining circular moving window	g.gui.rlisetup: Frame for choosing the sampling frame with keyboard
g.gui.rlisetup: Frame for drawing the sampling frame	g.gui.rlisetup: Summary frame before saving

EXAMPLES

Moving window analysis on full region

Example for a 7x7 moving window analysis on full region, the output is a raster map:

Click on "New", then:

• Configuration file name: "movwindow7"
• Raster map name to use to select areas: "forests"

• Define a sampling frame (region for analysis): "Whole map layer", then "OK"

• Define sampling areas: "Moving window", then "OK"
• Then click on "Use keyboard to define moving window dimension"

• [x] Rectangular
• Width size (in cells)?: "7"
• Height size (in cells)?: "7"
• Then "Save settings"

Now an anaysis can be performed using one of the analytical modules, e.g.

g.region raster=forests -p
r.li.patchdensity input=forests conf=movwindow7 output=forests_p_dens7
r.univar forests_p_dens7

Whole region analysis

• Configuration file name: "whole_region"
• Raster map name to use to select areas: "lsat7_2000_40"

• Define a sampling frame (region for analysis): "Whole map layer", then "OK"

• Define sampling areas: "Whole map layer", then "OK"

Now an anaysis can be performed using one of the analytical modules, e.g.

g.region raster=lsat7_2002_40 -p
r.li.shannon input=lsat7_2000_40 conf=whole_region output=lsat7_2000_40_shannon

SEE ALSO

Old r.le suite manual (1992)

wxGUI
wxGUI components

REFERENCES

AUTHOR

SOURCE CODE

Available at: wxGUI RLi Setup source code (history)

Latest change: Saturday Sep 17 10:35:43 2022 in commit: cf51ad543b83f93af907678737bc707dd5b43de7

Main index | GUI index | Topics index | Keywords index | Graphical index | Full index

© 2003-2023 GRASS Development Team, GRASS GIS 7.8.9dev Reference Manual