Note: This document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade, and read the current manual page.
NAME
r.in.gdal - Imports raster data into a GRASS raster map using GDAL library.KEYWORDS
raster, import, create locationSYNOPSIS
Flags:
- -o
- Override projection check (use current location's projection)
- Assume that the dataset has same projection as the current location
- -j
- Perform projection check only and exit
- -e
- Extend region extents based on new dataset
- Also updates the default region if in the PERMANENT mapset
- -f
- List supported formats and exit
- -l
- Force Lat/Lon maps to fit into geographic coordinates (90N,S; 180E,W)
- -a
- Auto-adjustment for lat/lon
- Attempt to fix small precision errors in resolution and extents
- -k
- Keep band numbers instead of using band color names
- -c
- Create the location specified by the "location" parameter and exit. Do not import the raster file.
- -r
- Limit import to the current region
- -p
- Print number of bands and exit
- --overwrite
- Allow output files to overwrite existing files
- --help
- Print usage summary
- --verbose
- Verbose module output
- --quiet
- Quiet module output
- --ui
- Force launching GUI dialog
Parameters:
- input=name [required]
- Name of raster file to be imported
- output=name [required]
- Name for output raster map
- band=integer[,integer,...]
- Band(s) to select (default is all bands)
- memory=memory in MB
- Maximum memory to be used (in MB)
- Cache size for raster rows
- Default: 300
- target=name
- Name of GCPs target location
- Name of location to create or to read projection from for GCPs transformation
- title=phrase
- Title for resultant raster map
- offset=integer
- Offset to be added to band numbers
- If 0, no offset is added and the first band is 1
- Default: 0
- num_digits=integer
- Zero-padding of band number by filling with leading zeros up to given number
- If 0, length will be adjusted to 'offset' number without leading zeros
- Default: 0
- map_names_file=name
- Name of the output file that contains the imported map names
- location=name
- Name for new location to create
- table=file
- File prefix for raster attribute tables
- The band number and ".csv" will be appended to the file prefix
- gdal_config=string
- GDAL configuration options
- Comma-separated list of key=value pairs
- gdal_doo=string
- GDAL dataset open options
- Comma-separated list of key=value pairs
Table of contents
DESCRIPTION
r.in.gdal allows a user to create a GRASS GIS raster map layer, or imagery group, from any GDAL supported raster map format, with an optional title. The imported file may also be optionally used to create a new location.GDAL supported raster formats
Full details on all GDAL supported formats are available at:http://www.gdal.org/formats_list.html
Selected formats out of the more than 140 supported formats:
Long Format Name Code Creation Georeferencing Maximum file size ---------------------------------------------+-------------+----------+--------------+----------------- ADRG/ARC Digitilized Raster Graphics ADRG Yes Yes -- Arc/Info ASCII Grid AAIGrid Yes Yes 2GB Arc/Info Binary Grid (.adf) AIG No Yes -- Arc/Info Export E00 GRID E00GRID No Yes -- ArcSDE Raster SDE No Yes -- ASCII Gridded XYZ XYZ Yes Yes -- BSB Nautical Chart Format (.kap) BSB No Yes -- CEOS (Spot for instance) CEOS No No -- DB2 DB2 Yes Yes No limits DODS / OPeNDAP DODS No Yes -- EarthWatch/DigitalGlobe .TIL TIL No No -- ENVI .hdr Labelled Raster ENVI Yes Yes No limits Envisat Image Product (.n1) ESAT No No -- EOSAT FAST Format FAST No Yes -- Epsilon - Wavelet compressed images EPSILON Yes No -- Erdas 7.x .LAN and .GIS LAN No Yes 2GB ERDAS Compressed Wavelets (.ecw) ECW Yes Yes Erdas Imagine (.img) HFA Yes Yes No limits Erdas Imagine Raw EIR No Yes -- ERMapper (.ers) ERS Yes Yes ESRI .hdr Labelled EHdr Yes Yes No limits EUMETSAT Archive native (.nat) MSGN No Yes FIT FIT Yes No -- FITS (.fits) FITS Yes No -- Fuji BAS Scanner Image FujiBAS No No -- GDAL Virtual (.vrt) VRT Yes Yes -- Generic Binary (.hdr Labelled) GENBIN No No -- GeoPackage GPKG Yes Yes No limits Geospatial PDF PDF Yes Yes -- GMT Compatible netCDF GMT Yes Yes 2GB Golden Software Surfer 7 Binary Grid GS7BG Yes Yes 4GiB Graphics Interchange Format (.gif) GIF Yes No 2GB GRASS Raster Format GRASS No Yes -- GSat File Format GFF No No -- Hierarchical Data Format Release 4 (HDF4) HDF4 Yes Yes 2GiB Hierarchical Data Format Release 5 (HDF5) HDF5 No Yes 2GiB Idrisi Raster RST Yes Yes No limits ILWIS Raster Map (.mpr,.mpl) ILWIS Yes Yes -- Image Display and Analysis (WinDisp) IDA Yes Yes 2GB In Memory Raster MEM Yes Yes Intergraph Raster INGR Yes Yes 2GiB IRIS IRIS No Yes -- Japanese DEM (.mem) JDEM No Yes -- JAXA PALSAR Product Reader (Level 1.1/1.5) JAXAPALSAR No No -- JPEG2000 (.jp2, .j2k) JP2OpenJPEG Yes Yes JPEG JFIF (.jpg) JPEG Yes Yes 4GiB KMLSUPEROVERLAY KMLSUPEROVERLAY Yes Yes MBTiles MBTiles Yes Yes -- Meta Raster Format MRF Yes Yes -- Meteosat Second Generation MSG No Yes MG4 Encoded Lidar MG4Lidar No Yes -- Microsoft Windows Device Independent Bitmap BMP Yes Yes 4GiB Military Elevation Data (.dt0, .dt1, .dt2) DTED Yes Yes -- Multi-resolution Seamless Image Database MrSID No Yes -- NASA Planetary Data System PDS No Yes -- NetCDF netCDF Yes Yes 2GB Netpbm (.ppm,.pgm) PNM Yes No No limits NITF NITF Yes Yes 10GB NLAPS Data Format NDF No Yes No limits NOAA NGS Geoid Height Grids NGSGEOID No Yes NOAA Polar Orbiter Level 1b Data Set (AVHRR) L1B No Yes -- OGC Web Coverage Service WCS No Yes -- OGC Web Map Service, and TMS, WorldWind, On EaWMS No Yes -- OGC Web Map Tile Service WMTS No Yes -- OGDI Bridge OGDI No Yes -- Oracle Spatial GeoRaster GEORASTER Yes Yes No limits OziExplorer .MAP MAP No Yes -- OZI OZF2/OZFX3 OZI No Yes -- PCI Geomatics Database File PCIDSK Yes Yes No limits PCRaster PCRaster Yes Yes Planet Labs Mosaics API PLMosaic No Yes -- Portable Network Graphics (.png) PNG Yes No PostGIS Raster (previously WKTRaster) PostGISRaster No Yes -- RadarSat2 XML (product.xml) RS2 No Yes 4GB Rasdaman RASDAMAN No No No limits Rasterlite - Rasters in SQLite DB Rasterlite Yes Yes -- Raster Product Format/RPF (CADRG, CIB) RPFTOC No Yes -- R Object Data Store R Yes No -- ROI_PAC Raster ROI_PAC Yes Yes -- R Raster (.grd) RRASTER No Yes -- SAGA GIS Binary format SAGA Yes Yes -- SAR CEOS SAR_CEOS No Yes -- Sentinel 1 SAR SAFE (manifest.safe) SAFE No Yes No limits Sentinel 2 SENTINEL2 No Yes No limits SGI Image Format SGI Yes Yes -- SRTM HGT Format SRTMHGT Yes Yes -- TerraSAR-X Complex SAR Data Product COSAR No No -- TerraSAR-X Product TSX Yes No -- TIFF / BigTIFF / GeoTIFF (.tif) GTiff Yes Yes 4GiB/None for BigTIFF USGS ASCII DEM / CDED (.dem) USGSDEM Yes Yes -- USGS Astrogeology ISIS cube (Version 3) ISIS3 No Yes -- USGS SDTS DEM (*CATD.DDF) SDTS No Yes -- Vexcel MFF MFF Yes Yes No limits VICAR VICAR No Yes -- VTP Binary Terrain Format (.bt) BT Yes Yes -- WEBP WEBP Yes No -- WMO GRIB1/GRIB2 (.grb) GRIB No Yes 2GB
Location Creation
r.in.gdal attempts to preserve projection information when importing datasets if the source format includes projection information, and if the GDAL driver supports it. If the projection of the source dataset does not match the projection of the current location r.in.gdal will report an error message (Projection of dataset does not appear to match current location) and then report the PROJ_INFO parameters of the source dataset.If the user wishes to ignore the difference between the apparent coordinate system of the source data and the current location, they may pass the -o flag to override the projection check.
If the user wishes to import the data with the full projection definition, it is possible to have r.in.gdal automatically create a new location based on the projection and extents of the file being read. This is accomplished by passing the name to be used for the new location via the location parameter. Upon completion of the command, a new location will have been created (with only a PERMANENT mapset), and the raster will have been imported with the indicated output name into the PERMANENT mapset.
Support for Ground Control Points
In case the image contains Ground Control Points (GCP) they are written to a POINTS file within an imagery group. They can directly be used for i.rectify.The target option allows you to automatically re-project the GCPs from their own projection into another projection read from the PROJ_INFO file of the location name target.
If the target location does not exist, a new location will be created matching the projection definition of the GCPs. The target of the output group will be set to the new location, and i.rectify can now be used without any further preparation.
Some satellite images (e.g. NOAA/AVHRR, ENVISAT) can contain hundreds or thousands of GCPs. In these cases thin plate spline coordinate transformation is recommended, either before import with gdalwarp -tps or after import with i.rectify -t.
Map names: Management of offset and leading zeros
The offset parameter allows adding an offset to band number(s) which is convenient in case of the import of e.g. a continuous time series split across different input files.The num_digits parameter allows defining the number of leading zeros (zero padding) in case of band numbers (e.g., to turn band.1 into band.001).
NOTES
Import of large files can be significantly faster when setting memory to the size of the input file.The r.in.gdal command does support the following features, as long as the underlying format driver supports it:
- Color Table
- Bands with associated colortables will have the color tables transferred.
Note that if the source has no colormap, r.in.gdal in GRASS 5.0 will emit
no colormap. Use r.colors map=... color=grey to assign a greyscale colormap.
In a future version of GRASS r.in.gdal will likely be upgraded to automatically
emit greyscale colormaps.
- Data Types
- Most GDAL data types are supported. Float32 and Float64 type bands
are translated as GRASS floating point cells (but not double precision ...
this could be added if needed), and most other types are translated as
GRASS integer cells. This includes 16bit integer data sources. Complex
(some SAR signal data formats) data bands are translated to two floating
point cell layers (*.real and *.imaginary).
- Georeferencing
- If the dataset has affine georeferencing information, this will be used
to set the north, south, east and west edges. Rotational coefficients will
be ignored, resulting in incorrect positioning for rotated datasets.
- Projection
- The dataset's projection will be used to compare to the current location
or to define a new location. Internally GDAL represents projections in
OpenGIS Well Known Text format. A large subset of the total set of GRASS
projections are supported.
- Null Values
- Raster bands for which a null value is recognised by GDAL will have
the null pixels transformed into GRASS style nulls during import. Many
generic formats (and formats poorly supported by GDAL) do not have a way
of recognising null pixels in which case r.null should be used after the
import.
- GCPs
- Datasets that have Ground Control Points will have them imported as
a POINTS file associated with the imagery group. Datasets with only one
band that would otherwise have been translated as a simple raster map
will also have an associated imagery group if there are ground control points.
The coordinate system of the ground control points is reported by r.in.gdal
but not preserved. It is up to the user to ensure that the location
established with i.target has a compatible coordinate system before using
the points with i.rectify.
- Raster Attribute Tables
- r.in.gdal can write out raster attribute tables as CSV files.
Moreover, information in raster attribute tables is automatically imported
as long as the field definitions contain information about how to use a
field, e.g. for color information or for labels.
Planned improvements to r.in.gdal in the future include support for reporting everything known about a dataset if the output parameter is not set.
Error Messages
"ERROR: Input map is rotated - cannot import."In this case the image must be first externally rotated, applying the rotation info stored in the metadata field of the raster image file. For example, the gdalwarp software can be used to transform the map to North-up (note, there are several gdalwarp parameters to select the resampling algorithm):
gdalwarp rotated.tif northup.tif
"ERROR: Projection of dataset does not appear to match the current location."
You need to create a location whose projection matches the data you
wish to import. Try using location parameter to create a new
location based upon the projection information in the file. If desired,
you can then re-project it to another location with r.proj.
Alternatively you can override this error by using the -o flag.
"WARNING: G_set_window(): Illegal latitude for North"
Latitude/Longitude locations in GRASS can not have regions which exceed
90° North or South. Non-georeferenced imagery will have coordinates
based on the images's number of pixels: 0,0 in the bottom left; cols,rows
in the top right. Typically imagery will be much more than 90 pixels tall
and so the GIS refuses to import it. If you are sure that the data is
appropriate for your Lat/Lon location and intentd to reset the map's
bounds with the r.region module directly after import you may
use the -l flag to constrain the map coordinates to legal values.
While the resulting bounds and resolution will likely be wrong for your
map the map's data will be unaltered and safe. After resetting to known
bounds with r.region you should double check them with
r.info, paying special attention to the map resolution. In most
cases you will want to import into the datafile's native projection, or
into a simple XY location and use the Georectifaction tools
(i.rectify et al.) to properly project into the target location.
The -l flag should only be used if you know the projection
is correct but the internal georeferencing has gotten lost, and you know
the what the map's bounds and resolution should be beforehand.
EXAMPLES
ECAD Data
The European Climate Assessment and Dataset (ECAD) project provides climate data for Europe ranging from 1950 - 2015 or later (Terms of use). To import the different chunks of data provided by the project as netCDF files, the offset parameter can be used to properly assign numbers to the series of daily raster maps from 1st Jan 1950 (in case of importing the ECAD data split into multi-annual chunks). The ECAD data must be imported into a LatLong location.By using the num_digits parameter leading zeros are added to the map name numbers, allowing for chronological numbering of the imported raster map layers, so that g.list lists them in the correct order. Here, use num_digits=5 to have a 5 digit suffix with leading zeros (00001 - 99999).
# Import of ECAD data split into chunks # Import precipitation data r.in.gdal -o input=rr_0.25deg_reg_1950-1964_v12.0.nc output=precipitation num_digits=5 offset=0 r.in.gdal -o input=rr_0.25deg_reg_1965-1979_v12.0.nc output=precipitation num_digits=5 offset=5479 r.in.gdal -o input=rr_0.25deg_reg_1980-1994_v12.0.nc output=precipitation num_digits=5 offset=10957 r.in.gdal -o input=rr_0.25deg_reg_1995-2015_v12.0.nc output=precipitation num_digits=5 offset=16436 # Import air pressure data r.in.gdal -o input=pp_0.25deg_reg_1950-1964_v12.0.nc output=air_pressure num_digits=5 offset=0 r.in.gdal -o input=pp_0.25deg_reg_1965-1979_v12.0.nc output=air_pressure num_digits=5 offset=5479 r.in.gdal -o input=pp_0.25deg_reg_1980-1994_v12.0.nc output=air_pressure num_digits=5 offset=10957 r.in.gdal -o input=pp_0.25deg_reg_1995-2015_v12.0.nc output=air_pressure num_digits=5 offset=16436 # Import min temperature data r.in.gdal -o input=tn_0.25deg_reg_1950-1964_v12.0.nc output=temperatur_min num_digits=5 offset=0 r.in.gdal -o input=tn_0.25deg_reg_1965-1979_v12.0.nc output=temperatur_min num_digits=5 offset=5479 r.in.gdal -o input=tn_0.25deg_reg_1980-1994_v12.0.nc output=temperatur_min num_digits=5 offset=10957 r.in.gdal -o input=tn_0.25deg_reg_1995-2015_v12.0.nc output=temperatur_min num_digits=5 offset=16436 # Import max temperature data r.in.gdal -o input=tx_0.25deg_reg_1950-1964_v12.0.nc output=temperatur_max num_digits=5 offset=0 r.in.gdal -o input=tx_0.25deg_reg_1965-1979_v12.0.nc output=temperatur_max num_digits=5 offset=5479 r.in.gdal -o input=tx_0.25deg_reg_1980-1994_v12.0.nc output=temperatur_max num_digits=5 offset=10957 r.in.gdal -o input=tx_0.25deg_reg_1995-2015_v12.0.nc output=temperatur_max num_digits=5 offset=16436 # Import mean temperature data r.in.gdal -o input=tg_0.25deg_reg_1950-1964_v12.0.nc output=temperatur_mean num_digits=5 offset=0 r.in.gdal -o input=tg_0.25deg_reg_1965-1979_v12.0.nc output=temperatur_mean num_digits=5 offset=5479 r.in.gdal -o input=tg_0.25deg_reg_1980-1994_v12.0.nc output=temperatur_mean num_digits=5 offset=10957 r.in.gdal -o input=tg_0.25deg_reg_1995-2015_v12.0.nc output=temperatur_mean num_digits=5 offset=16436
GTOPO30 DEM
To avoid the GTOPO30 data being read incorrectly, you can add a new line "PIXELTYPE SIGNEDINT" in the .HDR to force interpretation of the file as signed rather than unsigned integers. Then the .DEM file can be imported. Finally, e.g. the 'terrain' color table can be assigned to the imported map with r.colors.GLOBE DEM
To import GLOBE DEM tiles (approx 1km resolution, better than GTOPO30 DEM data), the user has to download additionally the related HDR file(s). Finally, e.g. the 'terrain' color table can be assigned to the imported map with r.colors. See also their DEM portal.Raster file import over network
Since GDAL 2.x it is possible to import raster data over the network (see GDAL Virtual File Systems) including Cloud Optimized GeoTIFF, i.e. access uncompressed and compressed raster data via a http(s) or ftp connection. As an example the import of the global SRTMGL1 V003 tiles at 1 arc second (about 30 meters) resolution, void-filled:r.in.gdal /vsicurl/https://www.datenatlas.de/geodata/public/srtmgl1/srtmgl1.003.tif output=srtmgl1_v003_30m memory=2000 g.region raster=srtmgl1_v003_30m -p r.colors srtmgl1_v003_30m color=srtm_plus
Worldclim.org data
To import the BIL data from Worldclim, the following line has to be added to each .hdr file:PIXELTYPE SIGNEDINT
To import the ESRI Grd data from Worldclim, the broken spatial extent (exceeding the boundaries) needs to be fixed prior to import:
# example: tmean dataset gdal_translate -a_ullr -180 90 180 -60 tmean_1 tmean_1_fixed.tif r.in.gdal input=tmean_1_fixed.tif output=tmean_1
HDF
The import of HDF bands requires the specification of the individual bands as seen by GDAL:
# Example MODIS FPAR
gdalinfo MOD15A2.A2003153.h18v04.004.2003171141042.hdf
...
Subdatasets:
SUBDATASET_1_NAME=HDF4_EOS:EOS_GRID:"MOD15A2.A2003153.h18v04.004.2003171141042.hdf":MOD_Grid_MOD15A2:Fpar_1km
SUBDATASET_1_DESC=[1200x1200] Fpar_1km MOD_Grid_MOD15A2 (8-bit unsigned integer)
SUBDATASET_2_NAME=HDF4_EOS:EOS_GRID:"MOD15A2.A2003153.h18v04.004.2003171141042.hdf":MOD_Grid_MOD15A2:Lai_1km
SUBDATASET_2_DESC=[1200x1200] Lai_1km MOD_Grid_MOD15A2 (8-bit unsigned integer)
...
# import of first band, here FPAR 1km:
r.in.gdal HDF4_EOS:EOS_GRID:"MOD15A2.A2003153.h18v04.004.2003171141042.hdf":MOD_Grid_MOD15A2:Fpar_1km \
out=fpar_1km_2003_06_02
# ... likewise for other HDF bands in the file.
SEE ALSO
r.colors, r.import, r.in.ascii, r.in.bin, r.null, t.registerGRASS GIS Wiki page: Import of Global datasets
REFERENCES
GDAL Pages: http://www.gdal.org/AUTHOR
Frank Warmerdam (email).SOURCE CODE
Available at: r.in.gdal source code (history)
Latest change: Wednesday Jan 27 21:15:26 2021 in commit: 2cf7e08b679327053f39d01060dd6a9e08e34f71
Main index | Raster index | Topics index | Keywords index | Graphical index | Full index
© 2003-2023 GRASS Development Team, GRASS GIS 7.8.9dev Reference Manual