Note: This document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade, and read the current manual page.

**-m**- Use 3D raster mask (if exists)
**-f**- Use a full filled quadratic linear equation system, default is a sparse linear equation system.
**--overwrite**- Allow output files to overwrite existing files
**--help**- Print usage summary
**--verbose**- Verbose module output
**--quiet**- Quiet module output
**--ui**- Force launching GUI dialog

**phead**=*name***[required]**- Input 3D raster map with initial piezometric heads in [m]
**status**=*name***[required]**- Input 3D raster map providing the status for each cell, = 0 - inactive, 1 - active, 2 - dirichlet
**hc_x**=*name***[required]**- Input 3D raster map with the x-part of the hydraulic conductivity tensor in [m/s]
**hc_y**=*name***[required]**- Input 3D raster map with the y-part of the hydraulic conductivity tensor in [m/s]
**hc_z**=*name***[required]**- Input 3D raster map with the z-part of the hydraulic conductivity tensor in [m/s]
**sink**=*name*- Input 3D raster map with sources and sinks in [m^3/s]
**yield**=*name***[required]**- Specific yield [1/m] input 3D raster map
**recharge**=*name*- Recharge input 3D raster map in m^3/s
**output**=*name***[required]**- Output 3D raster map storing the piezometric head result of the numerical calculation
**velocity_x**=*name*- Output 3D raster map storing the groundwater filter velocity vector part in x direction [m/s]
**velocity_y**=*name*- Output 3D raster map storing the groundwater filter velocity vector part in y direction [m/s]
**velocity_z**=*name*- Output 3D raster map storing the groundwater filter velocity vector part in z direction [m/s]
**budget**=*name*- Output 3D raster map storing the groundwater budget for each cell [m^3/s]
**dtime**=*float***[required]**- The calculation time in seconds
- Default:
*86400* **maxit**=*integer*- Maximum number of iteration used to solve the linear equation system
- Default:
*10000* **error**=*float*- Error break criteria for iterative solver
- Default:
*0.000001* **solver**=*name*- The type of solver which should solve the symmetric linear equation system
- Options:
*cg, pcg, cholesky* - Default:
*cg*

This module is sensitive to mask settings. All cells which are outside the mask are ignored and handled as no flow boundaries.

The module calculates the piezometric head and optionally the water
balance for each cell and the groundwater velocity field in 3 dimensions.
The vector components can be visualized with ParaView if they are exported
with *r3.out.vtk*.

The groundwater flow will always be calculated transient. For steady state computation the user should set the timestep to a large number (billions of seconds) or set the specific yield raster map to zero.

(dh/dt)*S = div (K grad h) + q

In detail for 3 dimensions:

(dh/dt)*S = Kxx * (d^2h/dx^2) + Kyy * (d^2h/dy^2) + Kzz * (d^2h/dz^2) + q

- h -- the piezometric head im meters [m]
- dt -- the time step for transient calculation in seconds [s]
- S -- the specific yield [1/m]
- b -- the bottom surface of the aquifer meters [m]
- Kxx -- the hydraulic conductivity tensor part in x direction in meter per second [m/s]
- Kyy -- the hydraulic conductivity tensor part in y direction in meter per seconds [m/s]
- Kzz -- the hydraulic conductivity tensor part in z direction in meter per seconds [m/s]
- q - inner source/sinc in [1/s]

Two different boundary conditions are implemented, the Dirichlet and Neumann conditions. By default the calculation area is surrounded by homogeneous Neumann boundary conditions. The calculation and boundary status of single cells can be set with the status map, the following cell states are supported:

- 0 == inactive - the cell with status 0 will not be calculated, active cells will have a no flow boundary to an inactive cell
- 1 == active - this cell is used for groundwater calculation, inner sources can be defined for those cells
- 2 == Dirichlet - cells of this type will have a fixed piezometric head value which do not change over time

Note that all required raster maps are read into main memory. Additionally the linear equation system will be allocated, so the memory consumption of this module rapidely grow with the size of the input maps.

The resulting linear equation system *Ax = b* can be solved with
several solvers. An iterative solvers with sparse and quadratic matrices
support is implemented.
The conjugate gradients method with (pcg) and without (cg) precondition.
Additionally a direct Cholesky solver is available. This direct solver
only work with normal quadratic matrices, so be careful using them with
large maps (maps of size 10.000 cells will need more than one Gigabyte
of RAM). The user should always prefer to use a sparse matrix solver.

# set the region accordingly g.region res=25 res3=25 t=100 b=0 n=1000 s=0 w=0 e=1000 -p3 #now create the input raster maps for a confined aquifer r3.mapcalc expression="phead = if(row() == 1 && depth() == 4, 50, 40)" r3.mapcalc expression="status = if(row() == 1 && depth() == 4, 2, 1)" r3.mapcalc expression="well = if(row() == 20 && col() == 20 && depth() == 2, -0.25, 0)" r3.mapcalc expression="hydcond = 0.00025" r3.mapcalc expression="syield = 0.0001" r.mapcalc expression="recharge = 0.0" r3.gwflow solver=cg phead=phead statuyield=status hc_x=hydcond hc_y=hydcond \ hc_z=hydcond sink=well yield=syield r=recharge output=gwresult dt=8640000 vx=vx vy=vy vz=vz budget=budget # The data can be visualized with ParaView when exported with r3.out.vtk r3.out.vtk -p in=gwresult,status,budget vector=vx,vy,vz out=/tmp/gwdata3d.vtk #now load the data into ParaView paraview --data=/tmp/gwdata3d.vtk

# set the region accordingly g.region res=15 res3=15 t=500 b=0 n=1000 s=0 w=0 e=1000 #now create the input raster maps for a confined aquifer r3.mapcalc expression="phead = if(col() == 1 && depth() == 33, 50, 40)" r3.mapcalc expression="status = if(col() == 1 && depth() == 33, 2, 1)" r3.mapcalc expression="well = if(row() == 20 && col() == 20 && depth() == 3, -0.25, 0)" r3.mapcalc expression="well = if(row() == 50 && col() == 50 && depth() == 3, -0.25, well)" r3.mapcalc expression="hydcond = 0.0025" r3.mapcalc expression="hydcond = if(depth() < 30 && depth() > 23 && col() < 60, 0.000025, hydcond)" r3.mapcalc expression="hydcond = if(depth() < 20 && depth() > 13 && col() > 7, 0.000025, hydcond)" r3.mapcalc expression="hydcond = if(depth() < 10 && depth() > 7 && col() < 60, 0.000025, hydcond)" r3.mapcalc expression="syield = 0.0001" r3.gwflow solver=cg phead=phead statuyield=status hc_x=hydcond hc_y=hydcond \ hc_z=hydcond sink=well yield=syield output=gwresult dt=8640000 vx=vx vy=vy vz=vz budget=budget # The data can be visualized with paraview when exported with r3.out.vtk r3.out.vtk -p in=gwresult,status,budget,hydcond,well vector=vx,vy,vz out=/tmp/gwdata3d.vtk #now load the data into paraview paraview --data=/tmp/gwdata3d.vtk

This work is based on the Diploma Thesis of Sören Gebbert available here at Technical University Berlin, Germany.

Available at: r3.gwflow source code (history)

Latest change: Monday Nov 18 20:15:32 2019 in commit: 1a1d107e4f6e1b846f9841c2c6fabf015c5f720d

Note: This document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade, and read the current manual page.

Main index | 3D raster index | Topics index | Keywords index | Graphical index | Full index

© 2003-2023 GRASS Development Team, GRASS GIS 7.8.9dev Reference Manual