GRASS logo

Note: This document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade, and read the current manual page.

NAME

r.carve - Generates stream channels.
Takes vector stream data, transforms it to raster and subtracts depth from the output DEM.

KEYWORDS

raster, hydrology

SYNOPSIS

r.carve
r.carve --help
r.carve [-n] raster=name vector=name output=name [points=name] [width=float] [depth=float] [--overwrite] [--help] [--verbose] [--quiet] [--ui]

Flags:

-n
No flat areas allowed in flow direction
--overwrite
Allow output files to overwrite existing files
--help
Print usage summary
--verbose
Verbose module output
--quiet
Quiet module output
--ui
Force launching GUI dialog

Parameters:

raster=name [required]
Name of input raster elevation map
vector=name [required]
Name of input vector map containing stream(s)
Or data source for direct OGR access
output=name [required]
Name for output raster map
points=name
Name for output vector map for adjusted stream points
width=float
Stream width (in meters)
Default is raster cell width
depth=float
Additional stream depth (in meters)

Table of contents

DESCRIPTION

r.carve accepts vector stream data as input, transforms them to raster, and subtracts a default-depth + additional-depth from a DEM. If the given width is more than 1 cell, it will carve the stream with the given width. With the -n flag it should eliminate all flat cells within the stream, so when and if the water gets into the stream it will flow. The points option generates x,y,z for points which define the stream with the z-value of the bottom of the carved-in stream. These points can then be combined with contours to interpolate a new DEM with better representation of valleys.

NOTES

r.carve does not create a depressionless DEM because many depressions are in flat areas and not in the streams.

EXAMPLE

North Carolina sample dataset:
# set computational region
g.region raster=elev_lid792_1m -p

# digitize a ditch for the farm pond
echo "L  3 1
 638692.93595422 220198.90026383
 638737.42270627 220149.74706926
 638984.43306379 220148.19158842
 1     1" | v.in.ascii -n input=- output=ditch format=standard

# visualize original data
d.mon wx0
d.rast elev_lid792_1m
d.vect ditch

# carve
r.carve raster=elev_lid792_1m vector=ditch output=carved_dem width=3 depth=0.5

# visualize resulting carved DEM map
d.rast carved_dem

# visualize
r.relief input=elev_lid792_1m output=elev_lid792_1m_shaded
r.relief input=carved_dem output=carved_dem_shaded
d.rast elev_lid792_1m_shaded
d.erase
d.rast carved_dem_shaded

# flow accumulation
r.watershed elevation=elev_lid792_1m accumulation=elev_lid792_1m_accum
r.watershed elevation=carved_dem accumulation=carved_dem_accum
d.rast elev_lid792_1m_accum
d.erase
d.rast carved_dem_accum

# differences
r.mapcalc "accum_diff = elev_lid792_1m_accum - carved_dem_accum"
r.colors accum_diff color=differences
d.erase
d.rast accum_diff
r.carve example: original DEM
Fig: Original 1m LiDAR based DEM with vector streams map on top
r.carve example: original DEM shaded
Fig: Original 1m LiDAR based DEM shown as shaded terrain
r.carve example: carved DEM
Fig: Carved 1m LiDAR based DEM
r.carve example: carved DEM shaded
Fig: Carved 1m LiDAR based DEM shown as shaded terrain
r.carve example: original DEM flow accumulated
Fig: Flow accumulation in original 1m LiDAR based DEM
r.carve example: carved DEM flow accumulation
Fig: Flow accumulation in carved 1m LiDAR based DEM

KNOWN ISSUES

The module does not operate yet in latitude-longitude locations. It has not been thoroughly tested, so not all options may work properly - but this was the intention.

REFERENCES

Terrain modeling and Soil Erosion Simulations for Fort Hood and Fort Polk test areas, by Helena Mitasova, Lubos Mitas, William M. Brown, Douglas M. Johnston, GMSL (Report for CERL 1999)

SEE ALSO

r.flow, r.fill.dir, r.watershed

AUTHORS

Bill Brown (GMSL)
GRASS 6 update: Brad Douglas

SOURCE CODE

Available at: r.carve source code (history)

Latest change: Thursday Feb 03 11:10:06 2022 in commit: 547ff44e6aecfb4c9cbf6a4717fc14e521bec0be


Note: This document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade, and read the current manual page.

Main index | Raster index | Topics index | Keywords index | Graphical index | Full index

© 2003-2023 GRASS Development Team, GRASS GIS 8.2.2dev Reference Manual