Note: This document is for an older version of GRASS GIS that is outdated. You should upgrade, and read the current manual page.

GRASS logo

NAME

t.rast.algebra - Apply temporal and spatial operations on space time raster datasets using temporal raster algebra.

KEYWORDS

temporal, algebra, raster, time

SYNOPSIS

t.rast.algebra
t.rast.algebra --help
t.rast.algebra [-sngd] expression=string basename=string [suffix=string] [nprocs=integer] [--help] [--verbose] [--quiet] [--ui]

Flags:

-s
Check the spatial topology of temporally related maps and process only spatially related maps
-n
Register Null maps
-g
Use granularity sampling instead of the temporal topology approach
-d
Perform a dry run, compute all dependencies and module calls but don't run them
--help
Print usage summary
--verbose
Verbose module output
--quiet
Quiet module output
--ui
Force launching GUI dialog

Parameters:

expression=string [required]
r.mapcalc expression for temporal and spatial analysis of space time raster datasets
basename=string [required]
Basename of the new generated output maps
A numerical suffix separated by an underscore will be attached to create a unique identifier
suffix=string
Suffix to add at basename: set 'gran' for granularity, 'time' for the full time format, 'num' for numerical suffix with a specific number of digits (default %05)
Default: num
nprocs=integer
Number of r.mapcalc processes to run in parallel
Default: 1

Table of contents

DESCRIPTION

t.rast.algebra performs temporal and spatial map algebra operations on space time raster datasets (STRDS) using the temporal raster algebra.

The module expects an expression as input parameter in the following form:

"result = expression"

The statement structure is similar to that of r.mapcalc. In this statement, result represents the name of the space time raster dataset (STRDS) that will contain the result of the calculation that is given as expression on the right side of the equality sign. These expressions can be any valid or nested combination of temporal operations and spatial overlay or buffer functions that are provided by the temporal algebra.

The temporal raster algebra works only with space time raster datasets (STRDS). The algebra provides methods for map selection based on their temporal relations. It is also possible to temporally shift maps, to create temporal buffer and to snap time instances to create a valid temporal topology. Furthermore, expressions can be nested and evaluated in conditional statements (if, else statements). Within if-statements, the algebra provides temporal variables like start time, end time, day of year, time differences or number of maps per time interval to build up conditions.
In addition the algebra provides a subset of the spatial operations from r.mapcalc. All these operations can be assigned to STRDS or to the map lists resulting of operations between STRDS.

By default, only temporal topological relations among space time datasets (STDS) are evaluated. The -s flag can be used to additionally activate the evaluation of the spatial topology based on the spatial extent of maps.

The expression option must be passed as quoted expression, for example: 

t.rast.algebra expression="C = A + B" basename=result
Where C is the new space time raster dataset that will contain maps with the basename "result" and a numerical suffix separated by an underscore that represent the sum of maps from the STRDS A and temporally equal maps (i.e., maps with equal temporal topology relation) from the STRDS B.

The map basename for the result STRDS must always be specified.

TEMPORAL RASTER ALGEBRA

The temporal algebra provides a wide range of temporal operators and functions that will be presented in the following section.

TEMPORAL RELATIONS

Several temporal topology relations are supported between maps registered in space time datasets: 
equals            A ------
                  B ------

during            A  ----
                  B ------

contains          A ------
                  B  ----

starts            A ----
                  B ------

started           A ------
                  B ----

finishs           A   ----
                  B ------

finished          A ------
                  B   ----

precedes          A ----
                  B     ----

follows           A     ----
                  B ----

overlapped        A   ------
                  B ------

overlaps          A ------
                  B   ------

over              both overlaps and overlapped
The relations must be read as: A is related to B, like - A equals B - A is during B - A contains B.

Topological relations must be specified with curly brackets {}.

TEMPORAL OPERATORS

The temporal algebra defines temporal operators that can be combined with other operators to perform spatio-temporal operations. The temporal operators process the time instances and intervals of two temporally related maps and calculate the resulting temporal extent in five possible different ways. 
LEFT REFERENCE     l       Use the time stamp of the left space time dataset
INTERSECTION       i       Intersection
DISJOINT UNION     d       Disjoint union
UNION              u       Union
RIGHT REFERENCE    r       Use the time stamp of the right space time dataset

TEMPORAL SELECTION

The temporal selection simply selects parts of a space time dataset without processing any raster or vector data. The algebra provides a selection operator : that by default selects parts of a space time dataset that are temporally equal to parts of a second space time dataset. The following expression 
C = A : B
means: select all parts of space time dataset A that are equal to B and store them in space time dataset C. These parts are time stamped maps.

In addition, the inverse selection operator !: is defined as the complement of the selection operator, hence the following expression 

C = A !: B
means: select all parts of space time time dataset A that are not equal to B and store them in space time dataset C.

To select parts of a STRDS using different topological relations regarding to other STRDS, the temporal topology selection operator can be used. This operator consists of the temporal selection operator, the topological relations that must be separated by the logical OR operator | and, the temporal extent operator. All three parts are separated by comma and surrounded by curly brackets as follows: {"temporal selection operator", "topological relations", "temporal operator"}.

Examples: 

C = A {:,equals} B
C = A {!:,equals} B
We can now define arbitrary topological relations using the OR operator "|" to connect them: 
C = A {:,equals|during|overlaps} B
Select all parts of A that are equal to B, during B or overlaps B.
In addition, we can define the temporal extent of the resulting STRDS by adding the temporal operator. 
C = A {:,during,r} B
Select all parts of A that are during B and use the temporal extents from B for C.

The selection operator is implicitly contained in the temporal topology selection operator, so that the following statements are exactly the same: 
C = A : B
C = A {:} B
C = A {:,equal} B
C = A {:,equal,l} B
Same for the complementary selection: 
C = A !: B
C = A {!:} B
C = A {!:,equal} B
C = A {!:,equal,l} B

CONDITIONAL STATEMENTS

Selection operations can be evaluated within conditional statements as showed below. Note that A and B can be either space time datasets or expressions. The temporal relationship between the conditions and the conclusions can be defined at the beginning of the if statement (third and fourth examples below). The relationship between then and else conclusion must be always equal. 
if statement                        decision option                        temporal relations
  if(if, then, else)
  if(conditions, A)                   A if conditions are True;              temporal topological relation between if and then is equal.
  if(conditions, A, B)                A if conditions are True, B otherwise; temporal topological relation between if, then and else is equal.
  if(topologies, conditions, A)       A if conditions are True;              temporal topological relation between if and then is explicitly specified by topologies.
  if(topologies, conditions, A, B)    A if conditions are True, B otherwise; temporal topological relation between if, then and else is explicitly specified by topologies.
The conditions are comparison expressions that are used to evaluate space time datasets. Specific values of temporal variables are compared by logical operators and evaluated for each map of the STRDS.
Important: The conditions are evaluated from left to right.

Logical operators

Symbol  description

  ==    equal
  !=    not equal
  >     greater than
  >=    greater than or equal
  <     less than
  <=    less than or equal
  &&    and
  ||    or

Temporal functions

The following temporal functions are evaluated only for the STDS that must be given in parenthesis. 
td(A)                    Returns a list of time intervals of STDS A

start_time(A)            Start time as HH::MM:SS
start_date(A)            Start date as yyyy-mm-DD
start_datetime(A)        Start datetime as yyyy-mm-DD HH:MM:SS
end_time(A)              End time as HH:MM:SS
end_date(A)              End date as yyyy-mm-DD
end_datetime(A)          End datetime as  yyyy-mm-DD HH:MM

start_doy(A)             Day of year (doy) from the start time [1 - 366]
start_dow(A)             Day of week (dow) from the start time [1 - 7], the start of the week is Monday == 1
start_year(A)            The year of the start time [0 - 9999]
start_month(A)           The month of the start time [1 - 12]
start_week(A)            Week of year of the start time [1 - 54]
start_day(A)             Day of month from the start time [1 - 31]
start_hour(A)            The hour of the start time [0 - 23]
start_minute(A)          The minute of the start time [0 - 59]
start_second(A)          The second of the start time [0 - 59]
end_doy(A)               Day of year (doy) from the end time [1 - 366]
end_dow(A)               Day of week (dow) from the end time [1 - 7], the start of the week is Monday == 1
end_year(A)              The year of the end time [0 - 9999]
end_month(A)             The month of the end time [1 - 12]
end_week(A)              Week of year of the end time [1 - 54]
end_day(A)               Day of month from the start time [1 - 31]
end_hour(A)              The hour of the end time [0 - 23]
end_minute(A)            The minute of the end time [0 - 59]
end_second(A)            The second of the end time [0 - 59]

Comparison operator

As mentioned above, the conditions are comparison expressions that are used to evaluate space time datasets. Specific values of temporal variables are compared by logical operators and evaluated for each map of the STDS and (optionally) related maps. For complex relations, the comparison operator can be used to combine conditions.
The structure is similar to the select operator with the addition of an aggregation operator: {"comparison operator", "topological relations", aggregation operator, "temporal operator"}
This aggregation operator (| or &) defines the behaviour when a map is related to more than one map, e.g. for the topological relation 'contains'. Should all (&) conditions for the related maps be true or is it sufficient to have any (|) condition that is true. The resulting boolean value is then compared to the first condition by the comparison operator (|| or &&). By default, the aggregation operator is related to the comparison operator:
comparison operator -> aggregation operator: 
|| -> | and && -> &
Examples: 
Condition 1 {||, equal, r} Condition 2
Condition 1 {&&, equal|during, l} Condition 2
Condition 1 {&&, equal|contains, |, l} Condition 2
Condition 1 {&&, equal|during, l} Condition 2 && Condition 3
Condition 1 {&&, equal|during, l} Condition 2 {&&,contains, |, r} Condition 3

Hash operator

Additionally, the number of maps in intervals can be computed and used in conditional statements with the hash (#) operator. 
A {#, contains} B
This expression computes the number of maps from space time dataset B which are during the time intervals of maps from space time dataset A.
A list of integers (scalars) corresponding to the maps of A that contain maps from B will be returned. 
C = if({equal}, A {#, contains} B > 2, A {:, contains} B)
This expression selects all maps from A that temporally contain at least 2 maps from B and stores them in space time dataset C. The leading equal statement in the if condition specifies the temporal relation between the if and then part of the if expression. This is very important, so we do not need to specify a global time reference (a space time dataset) for temporal processing.

Furthermore, the temporal algebra allows temporal buffering, shifting and snapping with the functions buff_t(), tshift() and tsnap(), respectively. 

buff_t(A, size)         Buffer STDS A with granule ("1 month" or 5)
tshift(A, size)         Shift STDS A with granule ("1 month" or 5)
tsnap(A)                Snap time instances and intervals of STDS A

Single map with temporal extent

The temporal algebra can also handle single maps with time stamps in the tmap() function. 
tmap()
For example: 
C = A {:, during} tmap(event)
This statement selects all maps from space time data set A that are during the temporal extent of the single map 'event'

Spatial raster operators

The module supports the following raster operations: 
Symbol  description     precedence

  %     modulus         1
  /     division        1
  *     multiplication  1
  +     addition        2
  -     subtraction     2
And raster functions: 
abs(x)                  return absolute value of x
float(x)                convert x to foating point
int(x)                  convert x to integer [ truncates ]
log(x)                  natural log of x
sqrt(x)                 square root of x
tan(x)                  tangent of x (x is in degrees)
round(x)                round x to nearest integer
sin(x)                  sine of x (x is in degrees)
isnull(x)               check if x = NULL
isntnull(x)             check if x is not NULL
null                    set null value
exist(x)                Check if x is in the current mapset

Single raster map

The temporal raster algebra features also a function to integrate single raster maps without time stamps into the expressions. 
map()
For example: 
C = A * map(constant_value)
This statement multiplies all raster maps from space time raster data set A with the raster map 'constant_value'

Combinations of temporal, raster and select operators

The user can combine the temporal topology relations, the temporal operators and the spatial/select operators to create spatio-temporal operators as follows: 
{"spatial or select operator", "list of temporal relations", "temporal operator"}
For multiple topological relations or several related maps the spatio-temporal operators feature implicit aggregation. The algebra evaluates the stated STDS by their temporal topologies and apply the given spatio-temporal operators in a aggregated form. If we have two STDS A and B, B has three maps: b1, b2, b3 that are all during the temporal extent of the single map a1 of A, then the following arithmetic calculations would implicitly aggregate all maps of B into one result map for a1 of A: 
 C = A {+, contains} B --> c1 = a1 + b1 + b2 + b3

Important: the aggregation behaviour is not symmetric 

 C = B {+, during} A --> c1 = b1 + a1
                         c2 = b2 + a1
                         c3 = b3 + a1

Temporal neighbourhood modifier

The neighbourhood modifier of r.mapcalc is extended for the temporal raster algebra with the temporal dimension. The format is strds[t,r,c], where t is the temporal offset, r is the row offset and c is the column offset. 
strds[2]
refers to the second successor of the current map. 

strds[1,2]
refers to the cell one row below and two columns to the right of the current cell in the current map. 

strds[1,-2,-1]
refers to the cell two rows above and one column to the left of the current cell of the first successor map. 

strds[-2,0,1]
refers to the cell one column to the right of the current cell in the second predecessor map.

EXAMPLES

Computation of NDVI

# Sentinel-2 bands are stored separately in two STDRS "S2_b4" and "S2_b8"
g.region raster=sentinel2_B04_10m -p
t.rast.list S2_b4
t.rast.list S2_b8
t.rast.algebra basename=ndvi expression="ndvi = float(S2_b8 - S2_b4) / ( S2_b8 + S2_b4 )" 
t.rast.colors input=ndvi color=ndvi

Sum of space-time raster datasets

Sum maps from STRDS A with maps from STRDS B which have equal time stamps and are temporally before Jan. 1. 2005 and store them in STRDS D: 
D = if(start_date(A) < "2005-01-01", A + B)
Create the sum of all maps from STRDS A and B that have equal time stamps and store the new maps in STRDS C: 
C = A + B

Sum of space-time raster datasets with temporal topology relation

Same expression with explicit definition of the temporal topology relation and temporal operators: 
C = A {+,equal,l} B

Selection of raster cells

Select all cells from STRDS B with equal temporal relations to STRDS A, if the cells of A are in the range [100.0, 1600] of time intervals that have more than 30 days (Jan, Mar, May, Jul, Aug, Oct, Dec): 
C = if(A > 100 && A < 1600 && td(A) > 30, B)

Selection of raster cells with temporal topology relation

Same expression with explicit definition of the temporal topology relation and temporal operators: 
C = if({equal}, A > 100 && A < 1600 {&&,equal} td(A) > 30, B)

Conditional computation

Compute the recharge in meters per second for all cells of precipitation STRDS "Prec" if the mean temperature specified in STRDS "Temp" is higher than 10 degrees. Computation is performed if STRDS "Prec" and "Temp" have equal time stamps. The number of days or fraction of days per interval is computed using the td() function that has as argument the STRDS "Prec": 
C = if(Temp > 10.0, Prec / 3600.0 / 24.0 / td(Prec))

Conditional computation with temporal topology relation

Same expression with explicit definition of the temporal topology relation and temporal operators: 
C = if({equal}, Temp > 10.0, Prec / 3600.0 / 24.0 {/,equal,l} td(Prec))

Computation with time intervals

Compute the mean value of all maps from STRDS A that are located during time intervals of STRDS B if more than one map of A is contained in an interval of B, use A otherwise. The resulting time intervals are either from B or A: 
C = if(B {#,contain} A > 1, (B {+,contain,l} A - B) / (B {#,contain} A), A)

Computation with time intervals with temporal topology relation

Same expression with explicit definition of the temporal topology relation and temporal operators: 
C = if({equal}, B {#,contain} A > 1, (B {+,contain,l} A {-,equal,l} B) {equal,=/} (B {#,contain} A), A)

SEE ALSO

r.mapcalc, t.vect.algebra, t.rast3d.algebra, t.select, t.rast3d.mapcalc, t.rast.mapcalc

Temporal data processing Wiki

REFERENCES

The use of this module requires the following software to be installed: PLY(Python-Lex-Yacc) 

# Ubuntu/Debian
sudo apt-get install python3-ply

# Fedora
sudo dnf install python3-ply

# MS-Windows (OSGeo4W: requires "python3-pip" package to be installed)
python3-pip install ply

Related publications:

SEE ALSO

v.overlay, v.buffer, v.patch, r.mapcalc

AUTHORS

Thomas Leppelt, Sören Gebbert, Thünen Institute of Climate-Smart Agriculture

SOURCE CODE

Available at: t.rast.algebra source code (history)

Latest change: Thu Feb 3 11:10:06 2022 in commit: 73413160a81ed43e7a5ca0dc16f0b56e450e9fef

Main index | Temporal index | Topics index | Keywords index | Graphical index | Full index

© 2003-2022 GRASS Development Team, GRASS GIS 8.0.3dev Reference Manual