NAME
r.stream.basins - Delineates basins according stream network.
Input can be stream network, vector point map with outlets or outlet coordinates.
KEYWORDS
raster,
hydrology,
stream network,
basin creation
SYNOPSIS
r.stream.basins
r.stream.basins --help
r.stream.basins [-zclm] direction=name [coordinates=east,north[,east,north,...]] [stream_rast=name] [cats=range] [points=name] [memory=integer] basins=name [--overwrite] [--help] [--verbose] [--quiet] [--ui]
Flags:
- -z
- Create zero-value background instead of NULL
- -c
- Use unique category sequence instead of input streams
- -l
- Create basins only for last stream links
- -m
- Use memory swap (operation is slow)
- --overwrite
- Allow output files to overwrite existing files
- --help
- Print usage summary
- --verbose
- Verbose module output
- --quiet
- Quiet module output
- --ui
- Force launching GUI dialog
Parameters:
- direction=name [required]
- Name of input flow direction raster map
- coordinates=east,north[,east,north,...]
- Basin's outlet's coordinates
- stream_rast=name
- Name of input stream mask raster map
- cats=range
- Category values
- Create basins only for these categories
- points=name
- Name of input vector map
- Name of input vector points map
- memory=integer
- Maximum memory used in memory swap mode (MB)
- Default: 300
- basins=name [required]
- Name for output basin raster map
The module
r.stream.basins is prepared to delineate basins and
subbasins with different input data. The module is prepared to delineate
an unrestricted number of basins in one step. It can delineate basins
with three methods:
- Using coordinates: this option performs the same operation as r.water.outlet.
- Using vector points: it allows to manually point outlets with any method.
- Using streams (most advanced): it allows broader functionalities: See the
examples for more details.
Only one method can be used at once: the methods cannot be mixed.
The recommended method requires two maps: flow direction and
streams.
Using cats option it is possible to create basins having the
same category of the stream they refer to.
The module is prepared to work with output data of r.watershed,
r.stream.extract, r.stream.order also with modification done by
r.reclass and r.mapcalc. r.stream.basins can delineate
basins according outlets marked by raster streams, polygons,
vector points or coordinates. If the outlets are given by
points or coordinates, the module delineates the basins individuating the cells that
drain into that point. If the outlets are marked by the streams, it includes the cells
that contribute to the last (downstream) cell of each stream.
If the outlets are marked by polygons, it includes the cells contributing to the
most downstream cell of the polygon. If the polygon covers more outlets
than of one basins, it will create a collective basin for all the outlets
with common category.
- -z
- Creates zero-value background instead of NULL. For some reason (like map
algebra calculation) zero-valued background may be required.
- -c
- By default r.stream.basins uses streams category as basin category. In some
cases - for example if streams map is a product of map algebra and separate streams
may not have unique values - this option will create a new category sequence for
each basin (it does not work in vector point mode).
- -l
- By default r.stream.basins creates basins for all unique streams. This option
delineates basins only for the last streams, ignoring upstream (it does not work in vector
point mode).
- direction
- Flow direction: name of input flow direction map produced by
r.watershed or r.stream.extract.
The resolution of the computational region must match with the resolution of
the raster map. Also the stream network map (if used) and the direction map
must have the same resolution. It is checked by default. If resolutions
differ, the module informs about it and stops. Region boundary and
maps boundaries may differ but it may lead to unexpected results.
- coors
- East and north coordinates for the basin outlet. Using this option, it is possible
to delineate only one basin at a time, similarly to r.water.outlet.
- stream_rast
- Stream network: name of input map of stream network, ordered according to the
convention used by r.watershed or r.stream.extract.
Since streams network produced by r.watershed and
r.stream.extract might slightly differ in detail, it is
required to use both stream and direction map produced by the same
module. The stream background can have either NULL or zero values.
- cats
- Stream categories to delineate basins for: All categories which are not in
the stream map are ignored. It is possible to use the stream network created by
r.watershed, r.stream.extract or r.stream.order.
For r.stream.order, it is possible to select the order for which basins will
be created. For example, to delineate only basins for the streams of second order,
use cats=2.
If you need unique categories for each basin, use -c flag.
- points
- Vector file containing basins outlets as vector points. Only points'
categories are used to delineate the basins. Attached tables are ignored. Every
point shall have its own unique category. In this mode, flags -l and
-c are ignored.
The module produces one raster map with basins defined according to the user's
rules.
To achieve good results, outlets markers created by the user shall overlap with
the streams, otherwise basins could result with very small area. Input maps
must be in CELL format (default output of r.watershed,
r.stream.order or r.stream.extract).
To delineate all basins with categories of streams:
r.stream.basins direction=direction stream_rast=streams basins=bas_basins_elem
To determine major and minor basins defined by outlets, ignoring
subbasins, use -l flag. This flag ignores all nodes and uses only real outlets
(in most cases that on map border):
r.stream.basins -l direction=direction stream_rast=streams basins=bas_basins_last
r.stream.basins direction=direction coors=639936.623832,216939.836449
To delineate one or more particular basins defined by given streams, add simply
stream categories:
r.stream.basins -lc direction=direction stream_rast=streams cats=2,7,184 basins=bas_basin
To delineate basins of particular order, the following procedure can be used:
r.stream.basins -lc direction=direction stream_rast=strahler cats=2 \
basins=bas_basin_strahler_2
The usage of polygons as outlets markers is useful when the exact stream course
cannot be clearly determined before running the analysis, but the area of its
occurrence can be determined (mainly by iterative simulations). In the example,
r.circle is used, but it can be substituted by any polygon created for example
with v.digit:
r.circle -b output=circle coordinate=639936.623832,216939.836449 max=200
r.stream.basins -c direction=direction streams=circle basins=bas_simul
To determine areas of contribution to streams of particular order use as
streams the result of ordering:
r.stream.basins direction=direction stream_rast=ord_strahler basins=bas_basin_strahler
Determination of areas of potential source of pollution. The example will be
done for lake marked with FULL_HYDR 8056 in North Carolina sample dataset. The
lake shall be extracted and converted to binary raster map.
v.extract -d input=lakes@PERMANENT output=lake8056 type=area layer=1 \
where='FULL_HYDRO = 8056' new=-1
v.to.rast input=lake8056 output=lake8056 use=val type=area layer=1 value=1
r.stream.basins direction=direction streams=lake8056 basins=bas_basin_lake
See also the tutorial: https://grass.osgeo.org/wiki/R.stream.*
r.watershed,
r.stream.extract,
r.stream.order,
r.stream.stats,
r.mapcalc,
r.reclass,
r.patch
r.water.outlet
Jarek Jasiewicz, Adam Mickiewicz University, Geoecology and Geoinformation
Institute.
SOURCE CODE
Available at:
r.stream.basins source code
(history)
Latest change: Monday Nov 11 18:04:48 2024 in commit: 59e289fdb093de6dd98d5827973e41128196887d
Main index |
Raster index |
Topics index |
Keywords index |
Graphical index |
Full index
© 2003-2024
GRASS Development Team,
GRASS GIS 8.4.1dev Reference Manual