r.stream.basins - GRASS GIS manual

Note: This document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade, and read the current manual page.

NAME

r.stream.basins - Delineates basins according stream network.
Input can be stream network, vector point map with outlets or outlet coordinates.

KEYWORDS

raster, hydrology, stream network, basin creation

SYNOPSIS

r.stream.basins

r.stream.basins --help

r.stream.basins [-zclm] direction=name [coordinates=east,north[,east,north,...]] [stream_rast=name] [cats=range] [points=name] [memory=integer] basins=name [--overwrite] [--help] [--verbose] [--quiet] [--ui]

Flags:

-z: Create zero-value background instead of NULL
-c: Use unique category sequence instead of input streams
-l: Create basins only for last stream links
-m: Use memory swap (operation is slow)
--overwrite: Allow output files to overwrite existing files
--help: Print usage summary
--verbose: Verbose module output
--quiet: Quiet module output
--ui: Force launching GUI dialog

Parameters:

direction=name [required]: Name of input flow direction raster map
coordinates=east,north[,east,north,...]: Basin's outlet's coordinates
stream_rast=name: Name of input stream mask raster map
cats=range: Category values; Create basins only for these categories
points=name: Name of input vector map; Name of input vector points map
memory=integer: Maximum memory used in memory swap mode (MB); Default: 300
basins=name [required]: Name for output basin raster map

DESCRIPTION
OPTIONS
OUTPUTS
NOTES
EXAMPLES
SEE ALSO
AUTHOR

DESCRIPTION

The module r.stream.basins is prepared to delineate basins and subbasins with different input data. The module is prepared to delineate an unrestricted number of basins in one step. It can delineate basins with three methods:

Using coordinates: this option performs the same operation as r.water.outlet.
Using vector points: it allows to manually point outlets with any method.
Using streams (most advanced): it allows broader functionalities: See the examples for more details.

Only one method can be used at once: the methods cannot be mixed.

The recommended method requires two maps: flow direction and streams. Using cats option it is possible to create basins having the same category of the stream they refer to. The module is prepared to work with output data of r.watershed, r.stream.extract, r.stream.order also with modification done by r.reclass and r.mapcalc. r.stream.basins can delineate basins according outlets marked by raster streams, polygons, vector points or coordinates. If the outlets are given by points or coordinates, the module delineates the basins individuating the cells that drain into that point. If the outlets are marked by the streams, it includes the cells that contribute to the last (downstream) cell of each stream. If the outlets are marked by polygons, it includes the cells contributing to the most downstream cell of the polygon. If the polygon covers more outlets than of one basins, it will create a collective basin for all the outlets with common category.

OPTIONS

-z: Creates zero-value background instead of NULL. For some reason (like map algebra calculation) zero-valued background may be required.
-c: By default r.stream.basins uses streams category as basin category. In some cases - for example if streams map is a product of map algebra and separate streams may not have unique values - this option will create a new category sequence for each basin (it does not work in vector point mode).
-l: By default r.stream.basins creates basins for all unique streams. This option delineates basins only for the last streams, ignoring upstream (it does not work in vector point mode).
direction: Flow direction: name of input flow direction map produced by r.watershed or r.stream.extract. The resolution of the computational region must match with the resolution of the raster map. Also the stream network map (if used) and the direction map must have the same resolution. It is checked by default. If resolutions differ, the module informs about it and stops. Region boundary and maps boundaries may differ but it may lead to unexpected results.
coors: East and north coordinates for the basin outlet. Using this option, it is possible to delineate only one basin at a time, similarly to r.water.outlet.
stream_rast: Stream network: name of input map of stream network, ordered according to the convention used by r.watershed or r.stream.extract. Since streams network produced by r.watershed and r.stream.extract might slightly differ in detail, it is required to use both stream and direction map produced by the same module. The stream background can have either NULL or zero values.
cats: Stream categories to delineate basins for: All categories which are not in the stream map are ignored. It is possible to use the stream network created by r.watershed, r.stream.extract or r.stream.order. For r.stream.order, it is possible to select the order for which basins will be created. For example, to delineate only basins for the streams of second order, use cats=2. If you need unique categories for each basin, use -c flag.
points: Vector file containing basins outlets as vector points. Only points' categories are used to delineate the basins. Attached tables are ignored. Every point shall have its own unique category. In this mode, flags -l and -c are ignored.

OUTPUTS

The module produces one raster map with basins defined according to the user's rules.

NOTES

To achieve good results, outlets markers created by the user shall overlap with the streams, otherwise basins could result with very small area. Input maps must be in CELL format (default output of r.watershed, r.stream.order or r.stream.extract).

EXAMPLES

To delineate all basins with categories of streams:

r.stream.basins direction=direction stream_rast=streams basins=bas_basins_elem

To determine major and minor basins defined by outlets, ignoring subbasins, use -l flag. This flag ignores all nodes and uses only real outlets (in most cases that on map border):

r.stream.basins -l direction=direction stream_rast=streams basins=bas_basins_last

r.stream.basins direction=direction coors=639936.623832,216939.836449

To delineate one or more particular basins defined by given streams, add simply stream categories:

r.stream.basins -lc direction=direction stream_rast=streams cats=2,7,184 basins=bas_basin

To delineate basins of particular order, the following procedure can be used:

r.stream.basins -lc direction=direction stream_rast=strahler cats=2 \
  basins=bas_basin_strahler_2

The usage of polygons as outlets markers is useful when the exact stream course cannot be clearly determined before running the analysis, but the area of its occurrence can be determined (mainly by iterative simulations). In the example, r.circle is used, but it can be substituted by any polygon created for example with v.digit:

r.circle -b output=circle coordinate=639936.623832,216939.836449 max=200
r.stream.basins -c direction=direction streams=circle basins=bas_simul

To determine areas of contribution to streams of particular order use as streams the result of ordering:

r.stream.basins direction=direction stream_rast=ord_strahler basins=bas_basin_strahler

Determination of areas of potential source of pollution. The example will be done for lake marked with FULL_HYDR 8056 in North Carolina sample dataset. The lake shall be extracted and converted to binary raster map.

v.extract -d input=lakes@PERMANENT output=lake8056 type=area layer=1 \
  where='FULL_HYDRO = 8056' new=-1

v.to.rast input=lake8056 output=lake8056 use=val type=area layer=1 value=1

r.stream.basins direction=direction streams=lake8056 basins=bas_basin_lake

See also the tutorial: http://grass.OSGeo.org/wiki/R.stream.*

AUTHOR

Jarek Jasiewicz, Adam Mickiewicz University, Geoecology and Geoinformation Institute.

SOURCE CODE

Available at: r.stream.basins source code (history)

Latest change: Monday Jun 24 13:07:24 2024 in commit: 71dbc88614ccda943c73db28f3531855610f6146