Table of contents

r.green - GRASS GIS manual
GRASS logo

Note: This document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade, and read the current manual page.

NAME

r.green - Computes the residual energy potential of different renewable energies like biomass or hydropower.

KEYWORDS

raster, biomass topic

DESCRIPTION

The r.green suite computes the residual energy potential of different renewable energies like biomass, ground source heat pumps, or hydropower.

The tool is organized in the module groups:

for which are composed of several programs considering different limits (e.g. theoretical, recommended, legal, technical, ecological and economic constraints).
These different scenarios can be compared so that the residual energy potential and the suitable places for constructing a new power plant can be identified.

All the modules of the tool r.green can be installed in GRASS GIS as following (see also r.green.install):

g.extension r.green

NOTES

The basis for creating the modules to calculate the energy potential is shown in the following image:

energy potential modelling

REFERENCES

SEE ALSO

r.green.install, r.green.biomassfor, r.green.gshp, r.green.hydro

AUTHOR

For authors and references, please refer to the respective module of r.green.

Note: This document is for an older version of GRASS GIS that will be discontinued soon. You should upgrade, and read the current manual page.

Main index | Topics index | Keywords index | Graphical index | Full index

© 2003-2023 GRASS Development Team, GRASS GIS 8.2.2dev Reference Manual