GRASS logo

NAME

r.topmodel - Simulates TOPMODEL which is a physically based hydrologic model.

KEYWORDS

raster, hydrology, model

SYNOPSIS

r.topmodel
r.topmodel --help
r.topmodel [-p] parameters=name topidxstats=name input=name output=name [timestep=integer] [topidxclass=integer] [topidx=name] [ntopidxclasses=integer] [outtopidxstats=name] [--overwrite] [--help] [--verbose] [--quiet] [--ui]

Flags:

-p
Preprocess only and stop after generating outtopidxstats
--overwrite
Allow output files to overwrite existing files
--help
Print usage summary
--verbose
Verbose module output
--quiet
Quiet module output
--ui
Force launching GUI dialog

Parameters:

parameters=name [required]
Name of input TOPMODEL parameters file
topidxstats=name [required]
Name of input topographic index statistics file
input=name [required]
Name of input rainfall and potential evapotranspiration data file
output=name [required]
Name for output file
timestep=integer
Time step
Generate output for this time step
topidxclass=integer
Topographic index class
Generate output for this topographic index class
topidx=name
Name of input topographic index raster map
Must be clipped to the catchment boundary. Used for generating outtopidxstats
ntopidxclasses=integer
Number of topographic index classes
Used for generating outtopidxstats
Default: 30
outtopidxstats=name
Name for output topographic index statistics file
Requires topidx and ntopidxclasses

Table of contents

DESCRIPTION

r.topmodel simulates TOPMODEL which is a physically based hydrologic model.

Parameters description

parameters
This file contains TOPMODEL parameters that describe the study area. Any lines starting with a # sign or empty lines are ignored.
# Subcatchment name
Subcatchment 1

################################################################################
# A [m^2]: Total subcatchment area
3.31697E+07

################################################################################
# qs0 [m/h]: Initial subsurface flow per unit area
#		"The first streamflow input is assumed to represent
#		 only the subsurface flow contribution in the watershed."
#								- Liaw (1988)
0.000075

# lnTe [ln(m^2/h)]: Areal average of the soil surface transmissivity
4.

# m [m]: Parameter controlling the decline rate of transmissivity
# See Beven and Kirkby (1979)
0.0125

# Sr0 [m]: Initial root zone storage deficit
0.0025

# Srmax [m]: Maximum root zone storage deficit
0.041

# td [h]: Unsaturated zone time delay per unit storage deficit if greater than 0
#  OR
# -alpha: Effective vertical hydraulic gradient if not greater than 0.
#
# For example, -10 means alpha=10.
60.

# vch [m/h]: Main channel routing velocity
20000.

# vr [m/h]: Internal subcatchment routing velocity
10000.

################################################################################
# infex: Calculate infiltration excess if not zero (integer)
0

# K0 [m/h]: Surface hydraulic conductivity
2.

# psi [m]: Wetting front suction
0.1

# dtheta: Water content change across the wetting front
0.1

################################################################################
# d [m]: Distance from the catchment outlet
#		The first value should be the mainstream distance from
#		the subcatchment outlet to the catchment outlet.
# Ad_r:  Cumulative area ratio of subcatchment (0.0 to 1.0)
#		The first and last values should be 0 and 1, respectively.

#   d  Ad_r
    0   0.0
 1000   0.2
 2000   0.4
 3000   0.6
 4000   0.8
 5000   1.0
input
This file contains observed weather data.
# dt [h]: Time step
24

################################################################################
# R [m/dt]:  Rainfall
# Ep [m/dt]: Potential evapotranspiration

# R             Ep
0.000033        0.000000
0.000053        0.011938
0.004821        0.000000
.
.
.
timestep
If a time step is specified, output will be generated for the specific time step in addition to the summary and total flows at the outlet. This parameter can be combined with topidxclass to specify a time step and topographic index class at the same time. If no topidxclass is given, output will be generated for all the topographic index classes.
toptopidxclass
If a topographic index class is specified, output will be generated for the given topographic index class. This parameter can be combined with timestep. If no timestep is given, output will be generated for all the time steps.
topidx, ntoptopidxclasses, outtoptopidxstats
The topidx map can optionally be used for creating a new topographic index statistics file. This map has to be already clipped to the catchment boundary. The entire range of topographic index values will be divided into ntoptopidxclasses and the area ratio of each class will be reported in the outtoptopidxstats file. These three parameters can be omitted unless a new topidxstats file needs to be created.

REFERENCES

SEE ALSO

r.fill.dir, r.mapcalc, r.topidx
How to run r.topmodel

AUTHORS

Huidae Cho, Hydro Laboratory, Kyungpook National University, South Korea

Based on TMOD9502.FOR by Keith Beven.

SOURCE CODE

Available at: r.topmodel source code (history)

Latest change: Wednesday Nov 27 22:53:26 2024 in commit: b90ce69e88409469369ec1edb86fde8ec822af8b


Main index | Raster index | Topics index | Keywords index | Graphical index | Full index

© 2003-2024 GRASS Development Team, GRASS GIS 8.4.1dev Reference Manual