r.subdayprecip.design - GRASS GIS manual

Note: This document is for an older version of GRASS GIS that has been discontinued. You should upgrade, and read the current manual page.

NAME

r.subdayprecip.design - Computes subday design precipitation totals.

KEYWORDS

raster, hydrology, precipitation

SYNOPSIS

r.subdayprecip.design

r.subdayprecip.design --help

r.subdayprecip.design map=name return_period=name[,name,...] rainlength=integer [area_size=float] [--help] [--verbose] [--quiet] [--ui]

Flags:

--help: Print usage summary
--verbose: Verbose module output
--quiet: Quiet module output
--ui: Force launching GUI dialog

Parameters:

map=name [required]: Vector map of location under analysis; Or data source for direct OGR access
return_period=name[,name,...] [required]: Rainfall raster maps of required return period; Options: N2, N5, N10, N20, N50, N100
rainlength=integer [required]: Design rainfall length in minutes; Options: 0-1439
area_size=float: Maximum area size to be processed (in km2, -1 for no limit); Default: 20

DESCRIPTION
NOTES
EXAMPLE
REFERENCES
- Acknowledgement
SEE ALSO
AUTHORS

DESCRIPTION

r.subdayprecip.design computes subday design precipitation totals based on Hradek's method of reduction of daily maximums to chosen duration.

The tool uses methods of zonal statistics to compute average values of 24 hours precipitation amounts of specified return period for a provided area or a spot. Rasters of daily maxima were derived from statistics published by Samaj et al. in 1985, which were based on precipitation series observed in 1901-1980. Calculated average value (in millimeters) is then reduced to the chosen length of design rain event.

NOTES

Subday design precipitation series are important for hydrological modelling and soil erosion problems in a small catchment scale when designing common measures for promoting water retention, landscape drainage systems, flood mitigation measures etc.

First automatization has been implemented by well-known method which is based on reduction of 24 hours design precipitation to shorter time. GIS can used for spatial supervised classification of point values of specified return periods (2, 10, 20, 50 and 100 years).


Figure: Basins (in orange) with orthophoto on background	Figure: Return periods (2, 10, 20, 50 years) in the area of the Czech Republic

Figure: IV.order basins colored by mean H_N2T60 value (in millimeters)

EXAMPLE

r.subdayprecip.design map=basin return_period=N2,N5,N10,N20 rainlength=60

REFERENCES

Landa M., Kavka P., Strouhal L. (2015). A GIS tool for reduction day precipitation to subday (poster)
Tomasu M. (2013). Tvorba nastoje pro sestaveni kratkodobych navrhovych destu na zaklade rizene interpolace a redukce (in Czech)
Torfs, P. J. J. F., Horacek, S., & Rakovec, O. (2010). Chimera, a framework for conceptual modelling using analytical sensitives to parameters: implementation and application to PDM model.
Sokol, Z., & Bliznak, V. (2009). Areal distribution and precipitation-altitude relationship of heavy short-term precipitation in the Czech Republic in the warm part of the year. Atmospheric Research, 94(4), 652-662.

Acknowledgement

This work has been supported by the research project QJ1520265 - "Variability of Short-term Precipitation and Runoff in Small Czech Drainage Basins and its Influence on Water Resources Management".

AUTHORS

Martin Landa, GeoForAll (OSGeoREL) Lab, Czech Technical University in Prague, Czech Republic
The module is inspired by Python script developed for Esri ArcGIS platform by M. Tomasu in 2013.

SOURCE CODE

Available at: r.subdayprecip.design source code (history)

Latest change: Monday Jun 28 07:54:09 2021 in commit: 1cfc0af029a35a5d6c7dae5ca7204d0eb85dbc55