r3.out.vtk - GRASS GIS manual

NAME

r3.out.vtk - Converts 3D raster maps into the VTK-ASCII format.

KEYWORDS

SYNOPSIS

r3.out.vtk

r3.out.vtk --help

r3.out.vtk [-psmocl] [input=name[,name,...]] [output=name] [null=float] [top=string] [bottom=string] [rgbmaps=name[,name,...]] [vectormaps=name[,name,...]] [zscale=float] [precision=integer] [--overwrite] [--help] [--verbose] [--quiet] [--ui]

Flags:

-p: Create VTK pointdata instead of VTK celldata (celldata is default)
-s: Create 3D elevation output with a top and a bottom surface, both raster maps are required.
-m: Use 3D raster mask (if exists) with input maps
-o: Scale factor affects the origin
-c: Correct the coordinates to match the VTK-OpenGL precision
-l: Do not convert the top-bottom resolution in case of lat long projection to meters
--overwrite: Allow output files to overwrite existing files
--help: Print usage summary
--verbose: Verbose module output
--quiet: Quiet module output
--ui: Force launching GUI dialog

Parameters:

input=name[,name,...]: 3D raster map(s) to be converted to VTK-ASCII data format
output=name: Name for VTK-ASCII output file
null=float: Float value to represent no data cell/points; Default: -99999.99
top=string: Top surface 2D raster map
bottom=string: Bottom surface 2D raster map
rgbmaps=name[,name,...]: Three (R,G,B) 3D raster maps to create RGB values [redmap,greenmap,bluemap]
vectormaps=name[,name,...]: Three (x,y,z) 3D raster maps to create vector values [xmap,ymap,zmap]
zscale=float: Scale factor for elevation; Default: 1.0
precision=integer: Number of significant digits (floating point only); Options: 0-20; Default: 12

DESCRIPTION
NOTES
- Difference between point- and celldata
EXAMPLES
SEE ALSO
AUTHOR

DESCRIPTION

The module r3.out.vtk outputs 3D raster maps into VTK-ASCII format. Maps are valid 3D raster maps in the current mapset search path. The output parameter is the name of a VTK-ASCII file which will be written in the current working directory. If output is not specified then standard output (stdout) is used. The module is sensitive to region settings (set with g.region).

NOTES

This module generates structured points with celldata (default) or pointdata. If top and bottom surfaces are requested an unstructured grid with celldata or a structured grid with pointdata is generated. This data is put in a simple VTK-ASCII file. Neither XML nor binary output are supported. It is possible to choose more then one 3D raster map to be written in the VTK-ASCII file. Each celldata is named as the 3D raster map it represents. The user can visualize this file with the VTK Toolkit, ParaView and MayaVi which are based on VTK. In case of 3D raster map with partially no data, the threshold filter in ParaView can be used to visualize the valid data. Just filter all data which is greater/lesser than the chosen null value in the VTK-ASCII file.

The top and bottom region values are expected in meters. If a Latitude-Longitude (LL) coordinates are used, the elevation value for each voxel will be converted into degrees.

The input, rgbmaps and vectormaps parameters are optional, so only the geometry can be exported.

If the user defines top and bottom and the 2D and 3D region values differ, the 2D resolution will be adjusted to the 3D resolution. The elevation maps are expected in meters. If Lat/Long coordinates are used, the elevation will automatically converted into degree. If the surface and bottom maps are in a different unit than meters, use the scale parameter to convert them into meters.

The RGB voxel data can be created from 2D raster maps (Landsat TM images) with r.to.rast3. The values of the RGB maps must be within 0 and 255. If not, the values are automatically set to 0 and warnings will be printed to stderr.

The vector data is created from three 3D raster maps. Each map represents a vector component. So x, y and z components are required in this order. This data can be visualized with Glyph3d or StreamTracer filters within Paraview.

If the -c flag is used and the data should be visualised together with other data exported via *.out.vtk modules, be sure the -c flag was also set in these modules. But this will only work with data from the SAME location (the reference point for the coordinates transformation is based on the center point of the default region).

Difference between point- and celldata

r3.out.vtk can export 3D raster maps with different representations.

pointdata -- the cells/values are represented by the center of the cell. Instead of cells, points are created. Each point can hold different values, but the user can only visualize one value at a time.
celldata The cells are created with the same height, width and depth as in GRASS. Each cell can hold different values, but the user can only visualize one value at a time.

EXAMPLES

Simple Spearfish example

g.region -d
g.region res=150 res3=150 t=80 b=0 tbres=10
r.mapcalc "bottom = 1800. - elevation.10m"

# synthetic data, could be geological structures:
r3.mapcalc "map3d = row()+col()+depth()"

#export of volume to VTK:
r3.out.vtk -s input=map3d top=elevation.10m bottom=bottom output=/tmp/out.vtk

# visualize in paraview or other VTK viewer:
paraview --data=/tmp/out.vtk

Spearfish example with RGB data

#set the region
g.region -d
g.region n=4926970 s=4914857 w=591583 e=607793 res=50 res3=50 t=80 b=0 tbres=10

#create a bottom surface
r.mapcalc "bottom = 1800. - elevation.10m"

# synthetic data, could be geological structures:
r3.mapcalc "map3d = row()+col()+depth()"

#get some satellite images with r.in.onearth
r.in.onearth -l output=Sat tmband=Red
r.in.onearth -l output=Sat tmband=IR1
r.in.onearth -l output=Sat tmband=IR2

#Convert the 2D maps to 3D raster maps with r.to.rast3
r.to.rast3 input=SatLandsatTM_Red output=SatLandsatTM_Red
r.to.rast3 input=SatLandsatTM_IR1 output=SatLandsatTM_IR1
r.to.rast3 input=SatLandsatTM_IR2 output=SatLandsatTM_IR2

#export of volume to VTK:
r3.out.vtk -s rgbmaps=SatLandsatTM_IR1,SatLandsatTM_IR2,SatLandsatTM_Red
input=map3d top=elevation.10m bottom=bottom output=/tmp/out.vtk

# visualize in paraview or other VTK viewer:
paraview --data=/tmp/out.vtk

Spearfish example with vector data

# set the region
g.region -d
g.region n=4926970 s=4914857 w=591583 e=607793 res=50 res3=50 t=80 b=0 tbres=10

# create a bottom surface
r.mapcalc "bottom = 1800. - elevation.10m"

# synthetic data, could be geological structures:
r3.mapcalc "map3d = row()+col()+depth()"

# synthetic vector data, could be groundwater stream vectors
r3.mapcalc "x_part = sin(row())"
r3.mapcalc "y_part = cos(col())"
r3.mapcalc "z_part = sin(depth())"


# export the stuff data to VTK:
r3.out.vtk -s vectormaps=x_part,y_part,z_part input=map3d top=elevation.10m
bottom=bottom output=/tmp/out.vtk

# visualize in paraview or other VTK viewer:
paraview --data=/tmp/out.vtk
# Now use the Glyph and Stream-Trace Filter to get nice vectors and streamlines

Slovakia3d example

#reduce resolution:
g.region -dp3 res=1000 res3=1000
r.mapcalc "bottom = 100"

#export of volume to VTK:
r3.out.vtk -s in=precip3d.500z50 top=dem500 bottom=bottom \
   output=/path/to/slovakia3d.vtk

# visualize in paraview or other VTK viewer:
paraview --data=/path/to/slovakia3d.vtk
# set Display style to 'surface#
# set Actor Control z to 10

AUTHOR

Sören Gebbert

SOURCE CODE

Available at: r3.out.vtk source code (history)

Latest change: Tuesday Mar 07 15:48:31 2023 in commit: 94afb5d1074b71895513338bd1d890dedd38069e